Login

Register

Login

Register



Recommended Products Based On Your Criteria

45 Products Found

$47.25

Chuck capacity 1/6" - 3/8" dia Jacobs - 250 fits 1/4" motor shaft dia Jacobs - 312 fits 5/6" motor shaft dia Jacobs - 375 fits 3/8" motor shaft dia

$50.00

CLP22-SS-375 – 316 Stainless Steel Coupling 3/8” diameter thru – not standard on any of our mixers but can be used on all the same mixers as the CPL22-375 coupling – cost $50.00 each

$19.75

CPL22-250 – Aluminum Coupling – 3/8” diameter to 1/4″ diameter – not standard on any of our mixers – cost $19.75 each

$19.75

Aluminum Coupling – 3/8” diameter to 5/16″ diameter – standard on the following mixers – cost $19.75 each JR4000

$19.75

CPL22-375 – Aluminum Coupling – 3/8” diameter thru – most popular coupling and standard for the following mixers: Model A Model G Model G-HD Model A-5 Model A-RV Model G-5 Model G-RV Model GG Model 1750 – all options Model 1200 Model 850 – all options Model 6000 – all options Model 350 – all [...]

$49.25

CPL50-375 – Aluminum Coupling – 1/2” diameter to 3/8″ diameter – standard on the following mixers – cost $49.25 each Model 750 Model 1500 Model 1500-RV

$49.25

CPL50-500 – Aluminum Coupling – 1/2” diameter thru – not standard on any of our mixers – cost $49.25 each

$1,043.00

Light duty - 1750 rpm max

$515.00

Light duty - 4000 rpm max

$1,186.00

Heavy duty - 2000 rpm max *This unit is equipped with a forward/reverse switch.

$148.75$203.75

Model FRL10 1/4 NPT Complete assembly as shown Model FRL 15 1/4 NPT Complete assembly as shown. *Specifically for Model 1500 If you have any questions about this filter/regulator & lubricator call us and speak to one of our experts. Shipping UPS in the United States only. Any other shipping should contact us.

$8.90$49.25

D1 - 250 fits 1/4" motor shaft dia D1 - 312 fits 5/6" motor shaft dia D1 - 375 fits 3/8" motor shaft dia D1 - 500 fits 1/2" motor shaft dia D1 - Replacement Sleeve

$11.00$81.75

D4 - 375 fits 3/8" motor shaft dia D4 - 500 fits 1/2" motor shaft dia D4 - 625 fits 5/8" motor shaft dia D4 Replacement Sleeve

Electric

Model 1200

$836.00

Heavy duty - 1200 rpm max

$952.00

Heavy duty - 3000 rpm max

$952.00

Heavy duty - 3000 rpm max

Electric

Model 1750

$642.00

Medium duty - 2000 rpm max

Electric

Model 350

$829.00

Heavy duty - 350 rpm max

Electric

Model 6000

$619.00

Light duty - 6000 rpm max

$894.00

Heavy duty - 3000 rpm max

Electric

Model 850

$803.00

Medium/Heavy duty - 1000 rpm max

Air

Model A

$378.00

Light duty - 10,000 rpm max

$510.00

Light/Medium duty - 7000 rpm max

$510.00

Light/Medium duty - 7000 rpm max

Air

Model G

$555.00

Medium/Heavy Duty - 1200 rpm max

$728.00

Medium/Heavy duty - 1000 rpm max

$790.00

Heavy duty - 170 rpm max

$583.00

Medium/Heavy duty - 1200 rpm max

$728.00

Medium/Heavy duty - 1000 rpm max

$82.25

Chuck capacity 1/16" - 3/8" dia Nylex-250 1/4″ motor shaft dia Nylex-312 5/16″ motor shaft dia Nylex-375 3/8″ motor shaft dia

$97.00

Chuck capacity 1/16" - 1/2" dia KLC 50-375 3/8″ motor shaft dia KLC 50-500 1/2″ motor shaft dia

$62.50

PHC-750 fits support stands from 1/2″ to 3/4″ dia. (12 mm to 19 mm) and can be used with Stand ASE-750 for a quick, complete laboratory mixer setup. This clamp is also compatible with any Arrow Mixing Products chuck. Shipping UPS in the United States only. Any other shipping should contact us.

$62.50

Arrow Mixing Products offers a variety of quality accessories including the Power Hold Universal Clamp – PHC-625 – which clamps laboratory mixers to support stands. Our powerhold universal clamps are versatile, and fit for multiple support stands. PHC-625 Fits support stands from 3/8″ to 5/8″ dia. (9.5 mm to 16 mm) Shipping UPS in the United States [...]

$136.50$208.75

PTFE-25 2-1/2″ PTFE-30 3″ PTFE-35 3-1/2″ PTFE-40 4″ PTFE-45 4-1/2″ Shipping UPS ground in the United States only. Any other shipping should contact us.

$63.00$117.50

S-PTFE10-12 12″ S-PTFE10-18 18″ S-PTFE10-20 20″ S-PTFE10-24 24″ Shipping UPS ground in the United States only. Any other shipping should contact us.

$343.25$375.50

SSS-15 fits vessels up to 15" inscribed circle SSS-55 fits 55 gallon drums Overall height of stand is 26" with a 5/8" dia center rod.

$32.50$57.75

Note: Propellers and couplings sold separately.

$201.00

ASE-625 5/8" dia. support stand Overall height of stand is 28" with a 5/8" dia center rod.

$214.00

ASE-750 3/4" dia support stand Overall height of stand is 28" with a 3/4" dia center rod.

Accessories

Swivel Clamp

$143.00

SC-750 Fits support stands from 1/2″ to 3/4″ dia. (12 mm to 19 mm) This swivel clamp pairs perfectly with this support stand. Shipping UPS in the United States only. Any other shipping should contact us.

$26.00$123.75

Arrow Mixing Products offers quality Type 316 propellers, a durable stainless propeller used with laboratory mixers & stirrers. Shipping UPS in the United States only. Any other shipping should contact us.

$111.00$137.50

All propellers are made of 316 stainless steel. They have a 5/16-24 internal thread for easy assembly with all of our stainless steel shafts. Through hole option available. Please contact us. VPP316-26 2-5/8″ VPP316-31 3-1/8″ VPP316-36 3-5/8″ VPP316-42 4-1/4″ VPP316-47 4-3/4″ VPP316-52 5-1/4″ Shipping UPS in the United States only. Any other shipping should contact [...]