No products in the cart.
CPL50-500 – Aluminum Coupling – 1/2” diameter thru – not standard on any of our mixers
Related products
Accessories
$33.25 – $58.50
Note: Propellers and couplings sold separately.
Accessories
$151.50 – $207.50
Model FRL10 1/4 NPT Complete assembly as shown Model FRL 15 1/4 NPT Complete assembly as shown. *Specifically for Model 1500 If you have any questions about this filter/regulator & lubricator call us and speak to one of our experts. Shipping UPS in the United States only. Any other shipping should contact us.
Accessories
$63.75
PHC-750 fits support stands from 1/2″ to 3/4″ dia. (12 mm to 19 mm) and can be used with Stand ASE-750 for a quick, complete laboratory mixer setup. This clamp is also compatible with any Arrow Mixing Products chuck. Shipping UPS in the United States only. Any other shipping should contact us.
Accessories
$50.00
CLP22-SS-375 – 316 Stainless Steel Coupling 3/8” diameter thru – not standard on any of our mixers but can be used on all the same mixers as the CPL22-375 coupling
Accessories
$50.00
CPL50-375 – Aluminum Coupling – 1/2” diameter to 3/8″ diameter – standard on the following mixers Model 750 Model 1500 Model 1500-RV
Accessories
$11.00 – $83.00
D4 - 375 fits 3/8" motor shaft dia D4 - 500 fits 1/2" motor shaft dia D4 - 625 fits 5/8" motor shaft dia D4 Replacement Sleeve
Accessories
$9.00 – $50.25
D1 - 250 fits 1/4" motor shaft dia D1 - 312 fits 5/6" motor shaft dia D1 - 375 fits 3/8" motor shaft dia D1 - 500 fits 1/2" motor shaft dia D1 - Replacement Sleeve
Accessories
$350.00 – $383.00
SSS-15 fits vessels up to 15" inscribed circle SSS-55 fits 55 gallon drums Overall height of stand is 26" with a 5/8" dia center rod.
Accessories
$48.25
Chuck capacity 1/16" - 3/8" dia Jacobs - 250 fits 1/4" motor shaft dia Jacobs - 312 fits 5/16" motor shaft dia Jacobs - 375 fits 3/8" motor shaft dia
Accessories
$20.25
CPL22-250 – Aluminum Coupling – 3/8” diameter to 1/4″ diameter – not standard on any of our mixers
$63.75
Arrow Mixing Products offers a variety of quality universal clamps including the Power Hold Universal Clamp – PHC-625 – which purpose is clamping laboratory mixers to support stands. Our powerhold universal clamps are versatile, and fit for multiple support clamp stands. PHC-625 (Clamp 625) Fits support stands from 3/8″ to 5/8″ dia. (9.5 mm to 16 mm) [...]
Accessories
$20.25
Aluminum Coupling – 3/8” diameter to 5/16″ diameter – standard on the following mixers – JR4000