No products in the cart.
Model FRL10 1/4 NPT Complete assembly as shown
Model FRL 15 1/4 NPT Complete assembly as shown. *Specifically for Model 1500
If you have any questions about this filter/regulator & lubricator call us and speak to one of our experts.
Shipping UPS in the United States only. Any other shipping should contact us.
| Weight | 4 lbs |
|---|---|
| Dimensions | 12 × 10 × 6 in |
| Part No. & Size | FRL10 (1/4 NPT Complete assembly as shown), FRL 15 (1/4 NPT Complete assembly as shown. *Specifically for Model 1500) |
Related products
Accessories
$19.75
Aluminum Coupling – 3/8” diameter to 5/16″ diameter – standard on the following mixers – cost $19.75 each JR4000
Accessories
$82.25
Chuck capacity 1/16" - 3/8" dia Nylex-250 1/4″ motor shaft dia Nylex-312 5/16″ motor shaft dia Nylex-375 3/8″ motor shaft dia
Accessories
$343.25 – $375.50
SSS-15 fits vessels up to 15" inscribed circle SSS-55 fits 55 gallon drums Overall height of stand is 26" with a 5/8" dia center rod.
Accessories
$19.75
CPL22-250 – Aluminum Coupling – 3/8” diameter to 1/4″ diameter – not standard on any of our mixers – cost $19.75 each
Accessories
$62.50
PHC-750 fits support stands from 1/2″ to 3/4″ dia. (12 mm to 19 mm) and can be used with Stand ASE-750 for a quick, complete laboratory mixer setup. This clamp is also compatible with any Arrow Mixing Products chuck. Shipping UPS in the United States only. Any other shipping should contact us.
Accessories
$63.00 – $117.50
S-PTFE10-12 12″ S-PTFE10-18 18″ S-PTFE10-20 20″ S-PTFE10-24 24″ Shipping UPS ground in the United States only. Any other shipping should contact us.
Accessories
$143.00
SC-750 Fits support stands from 1/2″ to 3/4″ dia. (12 mm to 19 mm) This swivel clamp pairs perfectly with this support stand. Shipping UPS in the United States only. Any other shipping should contact us.
Accessories
$97.00
Chuck capacity 1/16" - 1/2" dia KLC 50-375 3/8″ motor shaft dia KLC 50-500 1/2″ motor shaft dia
Accessories
$49.25
CPL50-375 – Aluminum Coupling – 1/2” diameter to 3/8″ diameter – standard on the following mixers – cost $49.25 each Model 750 Model 1500 Model 1500-RV
Accessories
$47.25
Chuck capacity 1/6" - 3/8" dia Jacobs - 250 fits 1/4" motor shaft dia Jacobs - 312 fits 5/6" motor shaft dia Jacobs - 375 fits 3/8" motor shaft dia
Accessories
$201.00
ASE-625 5/8" dia. support stand Overall height of stand is 28" with a 5/8" dia center rod.
Accessories
$8.90 – $49.25
D1 - 250 fits 1/4" motor shaft dia D1 - 312 fits 5/6" motor shaft dia D1 - 375 fits 3/8" motor shaft dia D1 - 500 fits 1/2" motor shaft dia D1 - Replacement Sleeve