No products in the cart.
ASE-750 3/4″ dia support stand
Shipping UPS in the United States only. Any other shipping should contact us.
| Weight | 13 lbs |
|---|---|
| Dimensions | 5 × 5 × 29 in |
| Part No. & Size | ASE-750 (3/4" di.a support stand) |
Related products
Accessories
$99.00
Chuck capacity 1/16" - 1/2" dia KLC 50-375 3/8″ motor shaft dia KLC 50-500 1/2″ motor shaft dia
Accessories
$11.00 – $83.00
D4 - 375 fits 3/8" motor shaft dia D4 - 500 fits 1/2" motor shaft dia D4 - 625 fits 5/8" motor shaft dia D4 Replacement Sleeve
Accessories
$20.25
Aluminum Coupling – 3/8” diameter to 5/16″ diameter – standard on the following mixers – cost $19.75 each JR4000
Accessories
$145.50
SC-750 Fits support stands from 1/2″ to 3/4″ dia. (12 mm to 19 mm) This swivel clamp pairs perfectly with this support stand. Shipping UPS in the United States only. Any other shipping should contact us.
Accessories
$48.25
Chuck capacity 1/6" - 3/8" dia Jacobs - 250 fits 1/4" motor shaft dia Jacobs - 312 fits 5/6" motor shaft dia Jacobs - 375 fits 3/8" motor shaft dia
Accessories
$50.00
CPL50-375 – Aluminum Coupling – 1/2” diameter to 3/8″ diameter – standard on the following mixers – cost $49.25 each Model 750 Model 1500 Model 1500-RV
Accessories
$151.50 – $207.50
Model FRL10 1/4 NPT Complete assembly as shown Model FRL 15 1/4 NPT Complete assembly as shown. *Specifically for Model 1500 If you have any questions about this filter/regulator & lubricator call us and speak to one of our experts. Shipping UPS in the United States only. Any other shipping should contact us.
Accessories
$20.25
CPL22-250 – Aluminum Coupling – 3/8” diameter to 1/4″ diameter – not standard on any of our mixers – cost $19.75 each
Accessories
$63.75
PHC-750 fits support stands from 1/2″ to 3/4″ dia. (12 mm to 19 mm) and can be used with Stand ASE-750 for a quick, complete laboratory mixer setup. This clamp is also compatible with any Arrow Mixing Products chuck. Shipping UPS in the United States only. Any other shipping should contact us.
Accessories
$9.00 – $50.25
D1 - 250 fits 1/4" motor shaft dia D1 - 312 fits 5/6" motor shaft dia D1 - 375 fits 3/8" motor shaft dia D1 - 500 fits 1/2" motor shaft dia D1 - Replacement Sleeve
Accessories
$64.00 – $119.50
S-PTFE10-12 12″ S-PTFE10-18 18″ S-PTFE10-20 20″ S-PTFE10-24 24″ Shipping UPS ground in the United States only. Any other shipping should contact us.
Accessories
$205.00
ASE-625 5/8" dia. support stand Overall height of stand is 28" with a 5/8" dia center rod.